Thumbnail for "UFOs" - @robo_dough Only @robo_dough can use this. Made on Canva. Here's how to make it clear and make it fit: 1. Go to https://ezgif.com/ 2. Tap The Button That Says “WebP” and choose “WebP Maker” 3. Click The Little Rectangle That Has A Small Button That Has Writing Above It That Says “Choose, Paste Or Drag And Drop Files Here” 4. Upload The Thumbnail 5. Tap The “Upload Files!” Button That’s At The Bottom 6. There Will Be A Square That Has The Thumbnail, A Button That Says Delay, And Skip And Copy Buttons. 7. Press “Copy” 8. Scroll Down Until You See A Button That Says “Make WebP!” And Press It 9. When You Tap The Make WebP Button The Thumbnail Image Should Appear Below 10. Make Sure That The Thumbnail Is Definitely Exactly 500 x 500 PX. If It Isn’t, There Is A Button Below Your Image That Says “Resize”. Press That And You’ll See Two Boxes. One Says Width And One Says Height. Type 500 In Both Of The Boxes. Then Beneath There Will Be A Box That Says 'If This Aspect Ratio Does Not Match' And There Will Be Writing Under It That Says 'Center And Crop To Fit'. Tap The Box And Choose 'Force Original Aspect Ratio', Then Press 'Resize Image!'. 11. Below Your Image There Should Be A Button That Says “Save”. Click It And The Thumbnail Will Automatically Download To Your Device 12. Go Back To Scratch And Upload The File. (The File That You Just Downloaded Will Have “Ezgif” In The Name Of It So That’s How You Identify It) 13. You Now Have A Clear Thumbnail! Note: It Will Take A Few Tries To Make It Your Pfp As It’s A WebP, But Eventually It’ll Work. Still don't understand? Check out this project: https://scratch.mit.edu/projects/1013936643 Please give credit when you use it!
