Instructions to activate the end of the Universe. Step 1: enter the correct code to authorize controls. Step 2: click the top left switch. then wait till the loading bar is complete then flip the top right switch and wait till loading bar is gone. Step 3: Press the card reader to begin system override wait till Data is scanned and finalized the bypass. step 4: Press the top left switch and wait for loading bar then press the bottom right switch Step 5: The grey box Bottom right Type Servers and wait. Then press the dark grey box to open it then press it again after its open to put systems into EMERGENCY MODE. Press grey box bottom right and type Controls Step 6: Press the Red lever and enter EMERGENCY MODE. Step 7: Flip the Grey lever to start systems step 8: press the switch that lights up and wait till multiple beeps are heard Step 9: Press the Grey box Bottom Right and type Servers Step 10: Flip the levers next to the black screens and wait till it says to Activate superconductors. Then press the lever next to the first one. DO ON BOTH SIDES Step 11: Press Grey box and type Controls then Press the switch that has a orange red light and wait till red switch is lit. Step 12: Flip red switch and then press the Red button after the cover is opened. Step 13: Enjoy the Rest of the universe while it experiences its last moments. You can stay in the control room or go to the warhead view
Used parts from Innovation inc thermal power plant the truth ending. And the warhead from CRFU & T_SD_02 Changing the switches and other controls to make activation easier to understand
