PLEASE do not copy this project. i worked very hard on it. This is an ADT Safewatch Pro-3000 (which is really the Ademco/Honeywell Vista 20P) Security System. Here are it's current functions: Reset/Disarm System = User Code + 1 Arm Away= User Code + 2 or # + 2 Arm Stay= User Code + 3 or # + 3 Arm Stay Instant: User Code + 7 or # + 7 Arm Night Stay (WILL BE PROGRAMMED SOON) Chime ON/OFF= User Code + 9 Voice ON/OFF= #024 System Status: #0*
NOTE! This project has been abandoned. It is not worth it anymore to work on this. I have many other projects that are WAY more realistic than this. Thank you. UPDATE 9/13/2025: Added a new voice! Replaced the old voice (recorded by me) with the official ADEMCO voice. UPDATE 8/15/2025: Replaced the Honeywell 5800PIR with an ADEMCO 5890PI, as safewatch installations usually used these at the time. UPDATE 8/11/2025: Replaced the ADEMCO 746 & ELK 110V4 siren driver with an ADT RX-7C, which is what the safewatch would have installed at the time. UPDATE 7/15/2025: Added the ability to arm Stay Instant. Added a 6150ADT, another 5816, and a 5800PIR Motion detector. Also added working keypad doors! System is now demo board style! If you get the code wrong, the button press sequence will be reset after 2 seconds of no buttons being pressed. If the keypad door gets stuck, hold it down for 2 seconds to reset it. If you cannot use your camera for the motion detector, you can click on it. User Code: 1234 Siren Driver: ELK-110 V4 Keypad: Ademco 6160VPADT Panel: ADT Safewatch Pro 3000 (Ademco Vista 20P) Door Sensors: Ademco 5816WMWH Motion Sensor: Ademco 5800PIR Click the magnet part of the door sensor to open it.
