Originally a standard Car Anatomy². Rebranded as "Car Anatomy ⅖" for testing and experiments with ALL realistic features found in real cars that would later be put in all Car Anatomy² and ³ projects. Rebranded on Sunday, April 12, 2026. Rebranded to "Car Anatomy 2.8" on Monday, April 27, 2026. Current Version is 1.8. Originally released on Jan 6, 2025 as Version 1.0. Reshared on Apr 05, 2026 after the 1.7 update. Note: The black stuff surrounding the wheels (on the truck body, not the wheels) are the Wheel Well Moldings. __________________Specs_____________________ Model: 2004 Ford F-150 FX4 Light Duty Regular Gasoline Engine: 4.6L V8 SOHC 2-Valve Modular [Sequential Multi-port electronic fuel injection] (engine swap from a 5.4L Triton 3-valve V8 [Direct Fuel Injection] which blew up because the spark plugs and cam phaser were destroyed) [231 Horsepower, 293 ft-lb Torque] [Non-Turbocharged] Mass: 2581 kg (5692 lbs) __________________Instructions________________ 1. Turn key to start. This key is located at the TOP of the RPM gauge, on the right side. 2. D Key to accelerate & S Key to decelerate. These controls are the opposite when in Reverse. 3. Select a gear (1st or 2nd to start) with gear shift or the W & E Keys. 4. A is the clutch, which is needed to change gears. 5. Drive faster and shift into higher gears as you go. 6. Click and drag to move the perspective. 7. Feel the "realism". Feel the "power". Feel the "real car". Transmission: 6-speed manual. (the original 4-speed Automatic transmission blew up, so the 6-speed transmission was installed) Top speed: 120 mph (or 200 km/h). Power: 231 horsepower. Drivetrain: Full-Time 4WD (4 Wheel Drive). Max RPM: 7000. Idle RPM: 600s. 0 - 60 time: 9.01 seconds. Gear ratio: 3.27:1. Notice: The engine is from a 2004 Crown Victoria P71. It had to be modified because the actual engine cannot withstand this rpm, without catastrophic failure occurring. In order to do this, several components were upgraded. High-performance "beehive" springs, aftermarket cams and ported heads, a high-flow intake, and a upgraded high-stall torque converter and a professional PCM tune in the Drivetrain were used to do this. All the "realistic" features (no Car Anatomy² projects ever have ANY of these): Rubber seals, better door animations, gray smoke, ambient sound, moving clouds, headlight working, taillight white strip lighting (if in Reverse), frame, key at top of RPM gauge, and others. Tell me what mistakes i made and i will fix it. basically a top-notch, and a realistic car anatomy² project Should I make this even more "realistic"?
-----------------------|UPDATE LOG|-------------------------- 1.0: development, project release 1.1: New Gauges, shading below side mirrors, and fixed a mistake in open front door side mirror that said, "OBJECTS IS MIRROR ARE CLOSER THAN THEY APPEAR" and the is for permanent is,"IN" and brake disc and brake calipers requested by @1990_Lexus_IS400 and that thingy above the rpm gauge new engine rolled in. 1.2: I ran into a big crisis wall. I accidentally deleted ENGINE variable and had to do everything to fix it but I found only one solution, that is, to add more code and also added comment on first sprite, and let alternative engine variable take over by me for it to work again as exact same car anatomy. Once everything was fixed, when you shutdown the engine, the idle stop sound was slightly louder than usual (FINALLY FIXED). the stall also comes on everytime you shutdown the truck. Had to rewire everything. Biggest trouble in my car anatomy history. 1.3: YOU can now open one or both doors on the truck. (Minor edit) 1.4: New truck 1.5: New background and engine (physical) along with sound 1.6: changed brake drums to discs when looking in the internal of brake disc and the internal spins along with external and thingy above rpm slightly changed when engine is off (DUE TO THIS, BUGS WILL OCCUR) 1.7 (big update): wiring, brake booster, new truck again (crew cab again UUUUUUUUUUUUUUGGGGGGGGGGGGGGGGGGGGGGHHHHHHHHHHHHHHHHHHHHH), headlight operational, frame will add, engine swap again, moving clouds will add,radio will add, day/night cycle will add( manual operation required), car horn adds, and new background adds. (passed) Additional upgrades: • Better rear door opening/closing animation • Rubber seals (if doors are open) (no Car Anatomy² project ever did this) • Smoke at exhaust • rpm gauge behaves realistically • more detail • Real sky • Real atmosphere • Better piston detail • and more! 1.7 update passed 1.7a: Ambient sound, fixed error with speedometer 1.7b: Add "4WD (4x4)" decal to bed 1.7c: New pedals Additional upgrades: • The all-new ACC mode (key) (No Car Anatomy² project ever has these) • New key (sourced from @JdmCarsCool) Disadvantage: • This project can no longer accept engine startups via the gas pedals and brake pedals if Drive Assist is on. The only way to turn on the engine would now have to be via the key itself. 1.7d: Add its HVAC system and change the left side of thumbnail 1.8: New road sounds and new gearstick 1.9: Phase 2 (2.0): ----‐-------------‐--[NOTES & CREDITS]---------------------- @gamaerkid for the smoke, scrolling background and project and @jeepmasterzj for interior, brake booster. Me for gearlever and @JdmCarsCool for gauges and keyfob locking and key and @1990_Lexus_IS400 for sound @goliat13 for the brake disc (although modified) and day/night panel and @ikeaaaaaaaaaaaa for the calipers @Max_The_Ginger_Cat for the "Wheels on the school bus go round" song @benk_b4b for realistic sky @eureka57vette for ambient sound @the-real-car for the road sounds @IguanaLover for tire rims and sounds Credit to all and no offense --------------[OUR STORY FOR MAKING THIS]----------‐---- this is my best artwork so far from other cars but my least accurate truck is 2009 ford f150 Lariat that got added to the og car anatomy studio but only for a short time and short after that, it got removed due to inaccuracy that made everyone hate me so much, because of a concern over my artwork that made me lose all my followers but for me soon, I have decided to steal the artwork and modify body and wheels and my friend @1990_Lexus_IS400 unfollowed me and soon made controversy about me and thinks I'm a rotten egg but I'm not, soon I have decided to FOR GOOD FOREVER UNSHARE THAT DAM PROJECT! Soon everyone followed me again and my friend refollowed me and I reported everyone. Planned Update: New sound (passed) New Pedals (on 1.7c update) (passed) New Gauges but not the speedometer and rpm gauges Update begins once we hit 1,000 views (passed) Reshared at 2:00 AM on Sun, Apr 5, 2026 after multiple delays in the update, originally planned to be reshared in mid-2025 Tags: #JdmCarsCool #2004 #Ford #F150 #Worstcarduetoproblems #truck #realistic #OFFROAD #FX4 #RECALLS #GAMES #ALL 666 REVIEWS: REEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE 999 VIEWS: REEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE How is it getting close to 1,000 views?
