READ ALL INSTRUCTIONS BEFORE STARTING! When starting the simulator, you will see a configuration screen. Set everything to desired values (For realistic flight, put Passengers to 0.) . >>> Click [show] in the key binds section to see all the controls. They can also be edited with the edit button. Default Controls: [W], [S] - Increase/decrease thrust [←], [→] - Elevators [Q], [A] - Increase/decrease flaps by 1 notch [E], [D] - Increase/decrease spoilers (multiple modes) [G] - Toggle landing gear [B] - Increase wheel brakes [P] - Pause [ ' ] - Play one frame [ - ], [ = ] - Zoom out / in [ / ] - Toggle mouse controlled yoke (for pitch) I highly recommend using this. [ [ ] - Set zoom to 10% [ ] ] - Set zoom to 60% [ \ ] - Toggle audible alarms (e.g. GPWS) [ . ] - Toggle elevator automatic reset [R], [F] - Increase/decrease elevator trim [T] - Toggle TO/GA [M] - Toggle audio [ I ] - Toggle extra buttons panel [4 - 7] - Switch between FMC displays [Click and drag vertically on IAS dial] - Change A/T IAS (ℹ️) READ THE FULL DOCUMENTATION / GUIDE: https://scratch.mit.edu/discuss/topic/435630
This project was remixed into a flight simulator dedicated to the retirement of the USAF's last KC-10's in 2024. Ever since I found the original project, I was in awe of it. I always wanted to remix it into another airplane. The KC-10 seemed like the perfect airplane because it is similar in speed to a 737 MAX 9, (Although the 737 is slightly faster) but also it is one of my favorite tanker aircraft. I wish I could add a third engine to the maintenance area, but there is not enough room.
