☢️ Custom Fusion Reactor ☢️ ⚠️ NO FURTHER UPDATES ⚠️ - Arrow keys to switch from room - Fullscreen for better resolution ========================================= \/ INSTUCTIONS DOWN! \/ ========================================= Tutorial: (SOON W.I.P) ================ Just remember: When Master Alarm goes off, press AZ-5 or/and Venting. To stop a meltdown or overpressure, else thousands of people will die, or dont >:) ================================== INSTRUCTIONS: Okay so, you have 4 coolant pumps, if they are red, they are off, if they are green they are on, and cooling the reactor. And, then you see those green and red arrows. That are the control rods. They are the control of the 'pressure' and a bit of temp. Making them 0, will make the PSI raise fast. Settings them at 100, will lower the PSI. But remember: Too low, is never good. Too high not good tho. And; if the PSI gets too high (number randomly generated, the control rods will get stuck. So no control over the PSI then.. And then you have AZ-5, This button shuts the reactor down.. Then you have emergency venting, this is the AZ-5, for the PRESSURE. So Emergency venting, will lower the PSI. But, high temp increases PSI, and if you have control rods at 0 too, he cant do so much.. So: Dont let the reactor gets too cold, or too hot, or let it overpressure. And: The more heat, The more power, The more MONEY!!!! :D Goodluck, PS: The coolant pumps can fail after some time, (Number of time randomly generated, no fix for it.. (yet)) ================================ HALL OF FAME - HALL OF SHAME - cs2975871
