This project is in beta. Some features may be broken. Use turbo mode if you are impatient. *Works on Mobile* This project is so detailed and realistic with the actual controls and real sound, that it will actually make you feel like you're in the locomotive. You are the engineer and are controlling an atsf sd45. --------------------[INSTRUCTIONS]-----‐-------------------- Use the notches to increase your speed, and use the notch down button to decrease speed. Use the reverser to change directions. Pull the horn lever to use the horn. Use the shutdown button to shutdown the engine. How to start engine: First, you need to turn on either isolation switch or starter switch. If you turn on isolation switch first, turn on starter switch. If you turn on starter switch first, turn on isolation switch. Then turn off battery master switch, fuel pumper breaker switch, and crankshaft exhaust switch. Then you need to turn on the generator field breaker. Now, you need to turn on/off the locomotive's brakes and throttle switch (may take a few times). The locomotive's brakes will need to be engaged and throttle switch closed. Make sure reverser is in neutral. New Control: You must now use the switch (the one next to the EMD logo) and use it once, berfore every startup. Now, you will be able to prime the engine. Press it, and it will prime. After a couple of seconds, the green start switch will be available. This is indicated by flashing, and 2 or 3 bells. Press the switch, and the warning sound will come. Finally, after a few moments, the engine will now start. How to start moving: The engine is on, reverser is in drive, and throttle switch is on. Make sure the brakes are off. Now change up a notch, you will begin to move. How to slow down: Simply use the notch down button or brakes. How to use lights: Use lights button to turn off/on lights. How to use bell: Press the flat button next to the horn lever. The bell will sound. Press again to turn off. How to see the prime mover: Use see engine variable. How to shut down engine: First, make sure engine is on. Then, turn off isolation switch and starter switch, then, click on the engine shutdown button to be able to turn off breakers. Do it in any order. Pull battery master switch on the last. The engine will now shut down. After a few seconds, You will be able to turn engine back on.
Do not report this project as i worked hard on it. Credit to the following owners who gave me the resources: @amtrakman4014- For the locomotive @EtDi2021 -For the prime mover and sound @Baste888- For the cars @spotter64- For all stuff on dashboard and the speedometer especially the switch sounds except for stuff i made (BIG THANKS!) @NeedaHand---Igotu- For the horn sound @ikeaaaaaaaaaaaa- for scrolling background @NortheastRegional608- For the rails and grass @ConrailSD70MAC- For remix @StrasburgRRFan- for emd logo on dashboard Me for the coding. If you remix, please give credit to me OR provide a link to this project. More credit (sound) Railpro for sounds. That is all. Start date: 08/01/2025 Finish date: 11/08/2025
