WIP, may encounter bugs. Click and drag points to hold them 2 buttons at top change object. hold G for slow motion Soft body using a spring mass system, you can go in the code and make your own objects right now, but it is a little annoying. The iterations are set to 8, in turbowarp you can normally achieve around 64 for me atleast, then setting the time scale for slow motion to 0.016/2 which is the slowest it can be at those iterations. If using iteration values other then current, spring strength and damping will need to be adjusted, normally weaker when the iterations are higher letting it be slower in a longer amount of time resulting in accurate simulations, here are the settings used in turbowarp at 64 iterations: custom load block: - spring strength = 0.001 - spring damping = 0.01 - mass 5 for jelly like physics, 1 for more rigid physics custom square block: - spring strength = 0.005 - spring damping = 0.05 - mass = 1 custom rope block - spring strength = 0.001 - spring damping = 0.1 - mass = 0.25 going lower then 1 mass can result in unstable simulation, Credits to: @samllea1 (me), i created this entire project myself in turbowarp then posted it here. #physics #softbody #cool #good #realistic #realism #jelly #real
