Press B to buy uranium Press S to sell power FULLSCREEN REQUIRED To get the reactor to the correct temperature to vaporize water for the turbines, buy uranium and let the reactor rise to 150 degrees or more. Then, turn on the steam input, auto sell and auto buy. Increase the water flow to about 10% or more to get at least 10% water in the reactor, be warned that higher water levels will drown the fission reaction and thus stall the core. Keep track of how fast the reactor is reacting with the "Reaction Speed" indicator. If it is less than 0, the thermal power is crashing. If it is more than 0, the thermal power and temperature are rising. You can activate the heat exchanger to allow heated water in the reactor to vaporize, this will decrease heat by drawing it away from the reactor, so do not try this if the thermal power is getting low. You can use control rods to change the reaction speed. More rods = less reaction = less heat. If the yellow alarm is going off, this means the heat or pressure level is abnormal. If the orange alarm is going off, the pressure is affecting the fission reaction severely. If the red alarm is going off, that means that even max water flow and control rod input will not save you-meaning you must SCRAM the reactor IMMEDIATELY! More temperature = more instability but less uranium usage. The turbine can only generate power if it is synced(at 3600 RPM, you can sync) Out of uranium and don't have enough money to buy more? Click the flag and try again.
Higher pressures make more heat, so be careful when using it ===Autorun info=== Autorun attempts to stabilize the temperature at a certain point. The higher the temperature, the more aggressive the stabilization becomes. It can even scram the reactor at a very high point! It also maintains a pressure of around 8 bars using the steam relief.
