絶対最後まで読んでください。 Please read to the end. 日本語は下にあります。 English (英語) 【how to use】 Set Color...Pressing this allows you to adjust color, saturation, and brightness similar to Scratch. The selected colors will apply to the round pen color indicator. Saturation and brightness adjustments will not be reflected. When the pen color value reaches 100, you'll be prompted whether to proceed to the next page. This is because there are still color options available. Selecting “はい”(Yes) will allow you to move to the next selection. You can also choose to go back. Note: If you press the × button instead of “はい”(Yes), you can close the window, but please don't skip this process and directly close the color settings screen—this may cause bugs. Pencil and eraser icons... Press the pencil to enter pen mode, allowing you to draw with the selected color. Press the eraser to enter eraser mode, enabling you to erase drawn areas. (The default mode is pen mode.) Press the ruler-like pen to draw straight lines. Click the start and end points of the line consecutively. Note that if you don't place the end point within one second after placing the start point, the line won't be drawn. Additionally, clicking more than once consecutively allows you to draw jagged lines. Therefore, wait at least one second before drawing a new straight line. Rainbow mode is not applied to ruler mode, so turning Rainbow ON will default to red. (Curves can still be drawn with the ruler.) thickness... As its name suggests, moving the bar allows you to change the pen's thickness. This also applies to the eraser's thickness. All erased... Allows you to delete all drawn images. The white areas can be drawn, while the gray areas remain untouchable. Please leave a comment if you have any bugs to report, features you'd like to see added, or questions. I will allow remixes as long as they make some changes to the original. As you can tell just by looking inside, I put a lot of effort into the code, so please share the ❤️ and ⭐️, and help spread the word! 日本語 (Japanese) 【使い方】 色を設定…これを押すと、scratchと同じように色、鮮やかさ、明るさ、透明度を設定することができ、設定した色は丸いペンの色と書かれた部分に反映されます。鮮やかさと明るさ、透明度は反映されません。また、レインボーにするかどうかの項目もあります。 ペンの色の数値が100になると、次のページに行くかどうか聞かれます。まだ選択できる色があるためです。「はい」を押すと次の選択肢に行くことができます。戻ることも可能です。 この際、「はい」ではなく×を押すと閉じることができますが、その工程をスキップして直で色の設定の画面を閉じるのはやめて下さい。バグります。 鉛筆マークと消しゴムマーク…鉛筆を押すとペンモードになり、設定した色を描くことができます。消しゴムを押すと消しモードになり、描いた箇所を消せるようになります。(最初はペンモードになっています) 定規のような見た目のペンを押すと、直線が描けるようになります。引きたい直線の始点と終点を連続でクリックしてください。この際、始点を置いた後、1秒以内に終点を置かないとと直線が引けません。また、2回以上連続でクリックするとカクカクとした線もかけます。なので新しい直線を引きたい場合は1秒以上たった後に引いてください。定規モードにレインボーは適用されないためレインボーをONにするとデフォルトの赤になります。(定規でも曲線は引けます) 太さ…その名の通り、バーを動かすとペンの太さを変えることができます。これは消しゴムの太さにも適用しています。 全消し…描いた絵を全て消すことができます。 白色の部分は描くことができ、灰色の場所は描けないようになっています。バグや、追加してほしい要素、質問があったらコメントしてください。 リミックスは何かしら変更すれば許可します。 見ればわかると思いますが本当にコードとか頑張ったので❤️⭐️、拡散お願いします!