If you don't know how to use the project, click the destination dispatch panel when you are in the elevator lobby, then use the keypad to type in your destination floor (any number from -9 to 99). It will automatically call an elevator and then add the floor number that you entered to that elevator's destination list after you have finished typing your destination floor. You can enter the elevator by clicking on the inside of the elevator that opens up after that elevator has arrived. Then you can wait for the doors to close automatically, or you can press the button with the two arrows facing towards the line to close the doors instantly. The yellow button is the alarm button. Press it if the elevator gets stuck. The 'open door' button (two arrows facing away from the line in the middle) can open the door (only if the elevator is not moving and if doors are closing or are already closed). To exit the elevator when you are inside it, make sure the doors are open, then click the background and you will be back at the screen you were at before, only it will be on the floor the elevator was on before you got out of the elevator. When you press the green flag, both elevators start on a random floor. You will also start on a random floor.
