The Jary 1 Rocket, designed in Spaceflight Simulator. It uses 5 heavy lift engines at the bottom of the first stage, the Liftoff stage, In the second stage, the Aerial stage, it uses 3 both high efficiency and high thrust engine. It helps getting through the boundary between space and Earth (The Kármán Line).On the third and last stage, the Orbital stage, uses a high efficiency engine which will be used to accelerate or decelerate depending on Expanding or Contracting the orbit. It also houses the fairing, which is used for carrying payload. The Jary 1 Rocket is used for faraway missions like getting into the orbit of Jupiter. It can also be used in smaller missions like moon landings and docking to the CJKSS (CJK Space Station). With its high thrust/weight (2.01 with empty payload), it can carry heavy payload (Max. 216 t). The Jary 1 Rocket also has an emergency escape system that includes the emergency ejection system on the third stage that can launch the payload up in the air a few meters. It can only be used when the fairing is detached. The emergency system also includes the third stage. It is used to take the payload to a safe place for recovery. So if an emergency happens after launch, the third stage’s engine would fire up to bring the payload to safety and the fairing will be detached. It also has a pair of landing legs to land safely. The Jary 1 Rocket’s second and the third stage can be reusable but the second stage recovery is still under development. In two seperate test flights, the third stage landed safely and got recovered. Mission Log: CJK Jupiter Orbiter 01 CJK Link launch No. 1-60 CJKSS Docking No. 1-6 Test flights xN CJK Asteroid Impactor 01 Trivia: 1. It is named after my nickname (Jary) 2. It is the first rocket in the CJK rocket family to not have side boosters. 3. It is first named “CJK 5” before it was quickly renamed to “Jary 1”. by Jary CJKSLC’s Co-founder
https://www.tinkercad.com/things/aLKfwcLg7jQ-jary-1-rocket /\ | | 3D design
