Created circa mid-2016 Use your mouse to move the pointer. Click to paint a square at your pointer. Your pointer appears at the bottom-left square of your mouse. Clicking outside the canvas will not allow you to paint. By pressing space, you can toggle painting and viewing mode. Pick a color with the up and down arrow keys. The possible colors are lined up on your right. Click "Save" to save your painting. A save code will appear. Triple-click (or press Ctrl/Cmd + A after clicking) the code and press Ctrl/Cmd + C to copy your code. Click "Load" to load a painting. Paste a save code in the answer box by pressing Ctrl/Cmd + V. Your painting will take 10-20 seconds to load. From there, you can either edit it or press space to look at it. The maze button does nothing. This is a 378*360 (21/18) board (was supposed to be 360*360 (20/20), but I miscalculated) --------------------------------------------- This is project I was making (Working title and all) to demonstrate save codes and loading them (I think I even considered adding cloud saving), but I lost motivation somewhere near December 27, 2016, and put it in the trash folder. I came back to this project on November 19, 2018, and tied the loose ends of what I actually finished, and shared the end result. I don't plan to add Maze/Art mode to this project, though you may see remnants of it (and other ideas deserving to remain concealed [.]~[.]) inside. Have a happy Thanksgiving, and I'll see you guys... uh... ...right? *load this* C5C5C5C5C5C5C5C5C5C5C5B5B5B5B5B5B5B5B5B5B5555555555555555555555555555555555555555555545454545454545454545444444444444444444444444444444444444444444444444444444444444444444443444444344444434434434443443444344344344434434443443444344344344434434443443444222222222222222222222212121212121212121212111111111111111111111010101010101010101010000000000000000000000CC0C0C0C0C0C0C0C0C0CC
