The code for Floor 5 (4) on the keypad is: >>> 12AB <<< Enter this after it says that the floor is restricted. Use the panel buttons on the left to call the lift to a floor, interact with the doors or ring the emergency alarm. To use a callstation to call the lift from outside, click a call panel (don't worry about precisely clicking the call button) to zoom into the callstation, where you can call the elevator. Click the "Exterior" button to remove the shaft walls, so you can see the lift's workings.
The motion system overshoots less when Turbo Mode is on. Turn on Turbo Mode via Shift+Green Flag, or in mobile go to the "Edit" tab, then tap "Turn On Turbo Mode" Inspired by ZZ9's lift simulation The keypad's floor range is from 0 to 4, do not confuse with 1 to 5. The top floor is restricted, so you will need to enter the code "12AB" to access. - DD Keypad Fixture: https://scratch.mit.edu/projects/1297960573 - Original Project: https://scratch.mit.edu/projects/1297260560 This is a modification of my 5 floor realistic lift sim with a destination dispatch keypad on every floor servicing not one, but two lifts. Hope you like it!
