No you cannot buy him Its really quite simple if you want to do it too, so here it is NEED: -oven bake clay -acrylic paint and paint brushes -resin sealer, epoxy resin, or UV resin (clear nail polish if you have neither.) -wire and foil (use pipe cleaners if you dont have wire) -an oven (uh- doy) Optional: -pliers (if you have trouble with the wire) -sculpting tools -UV light (for uv resin) 1) create armature for your figure with the wire and pose them how you want. Use the foil to bulk it up and shape it so you dont use too much clay because oven bake clay is crazy expensive for some reason. 2) cover the armature with clay and shape whoever you wish. *Parental figure needed- 3) depending on what oven bake clay you used, preheat the oven to whatever the instructions on the packaging say. Make sure you dont over heat it or cook the clay for too long or you’ll break it 3.5) never and i mean NEVER USE A MICROWAVE TO BAKE THE CLAY. THERES FOIL INSIDE THE CLAY AND YOU WILL MAKE THE MICROWAVE GO BOOM. 4) after its done baking, please be careful and not burn yourself. Let the clay cool off for about 10 minutes. 5) paint your figure with your acrylic paint. *Parental figure needed - 6) finish it off by… -spraying it with resin sealer OUTSIDE (what i did), make sure you cover/protect your face and wear gloves. protect surfaces you dont want resin on. -epoxy resin where you can paint a clear coat onto it and it air dries. Make sure you wear gloves and protect surfaces you dont want resin on. -UV resin is just like epoxy, but you need a special light to dry it. You should have a UV light on you if you do that. Make sure you wear gloves. -clear nail polish is a good substitute for any of these items if you don’t have any other options. And then you’re done :D let me know if you have any other questions!
