INSTRUCTIONS (read): Your goal is to produce enough energy before your core melts down or stalls. Hitting the energy quota will move you to the next shift, with new buttons and features to take care of. If temperature < -5000, the core will stall. If temperature > 38000, the core will meltdown. Stalling or melting down will cause you to restart the current shift. Temperature increases by 2*∆Pressure, or 2 times the change in pressure each second. ******** Shift 1: ******** CBLs: 3 sets of white to red buttons. They control the amount of pressure being added to the core, with red being the highest amount of pressure. They also increase their own pressure. There is a corresponding Purge button with each CBL, increasing the core temperature but decreasing the core pressure and its corresponding CBL pressure. If a CBLs pressure goes above 10000, it will break and become unusable, along with its purge button. Coolants: 3 sets of white to blue buttons. They decrease the temperature and pressure of the core, with white being turned off and blue being the highest. PEA: 1 set of white to purple buttons. They extract energy from the core, with white being the least energy and dark purple being the most. Extracting at higher levels decreases your extraction integrity more, and hitting 0 causes your core to meltdown. If your core temperature is <20000, your Extraction Integrity will slowly go back up. Extracting at higher temperatures also produces more energy, with the tiers being: t<0: x0 energy 0<t<24000: x0.2 energy 24000<t<30000: x1 energy 30000<t: x1.5 energy Fans: 6 on and off buttons that decrease the temperature of the core passively when turned on. Atmospheric Vent (labelled VENT): A button that triggers a 15-second sequence where it decrease your pressure in the core and slightly increases the core's temperature. (This leads to a net decrease in temperature) Emergency Vent (Labelled E-VENT): Massively decreases the pressure of the core and all 3 CBLs, only has 3 uses across all shifts. ******** Shift 2: ******** Gravitron: A purple on and off button that controls the screen. When turned on, the screen stability increases and the gravitron stability decreases. When turned off, the screen stability decreases and the gravitron stability increases. If the screen stability hits 0, the temperature and pressures of the core and CBLs are hidden until the screen is fixed. To fix the screen, you need to click the "Fix screen" button that teleports across your screen 10 times. If the gravitron stability hits 0, the gravitron is broken and the screen stability will continue to decrease until it hits 0, where you have to fix it. EFEquinox: A visual event that randomly happens with a 1 in 5 chance every 30 seconds. Background turns purple and white particles appear on your screen. ********* Shift 3: ********* CBL Fixes: When your CBL breaks, you can repair it now by clicking a emergency button that teleports across your screen once. Your CBLs will randomly break now, indicated by a completely bright CBL. Command prompt: Clicking it prompts you to type in a command. Used to fix the PEA (and maybe other stuff later on). PEA Fixes: Your PEA can randomly break now, in 3 different ways, and you will need to type a command into the command prompt to fix it. PEA turns black: "PEA: override" PEA turns red: "PEA: reboot" PEA starts shaking: "PEA: stabilise" Equinox Event: Happens 3/4 through the energy goal. Summons an EFEquinox and breaks two random CBLs. ********* Shift 4: ********* Coolant Fixes: Coolants will now randomly break and be indicated by a red color. To fix, type: "coolant1", "coolant2" or "coolant3" in the command prompt depending on which coolant is broken. Core Stabiliser: There is a red and orange line rotating around the core. If they touch, the core meltdowns. To stop this, press the stabilise button to change the direction of movement of the red line. The red line's speed scales linearly with core pressure, so a higher core pressure results in a faster red line.