- Click green flag to turn on camera. - Make sure to click allow when it asks. - After clicking the green flag go to the bottom of the screen to make all the options appear. - Click take photo to take a photo which then is shown - You can copy the by selecting the item in "Current Image Code" and press Control+A then Control+C then paste it here: https://scratch.mit.edu/discuss/topic/225491/ - Copy a save code and paste it in "Load Photo". - Colour effect changes the colour (But not the shade): 0 = No Change Anything else = Whatever Colour - Draw Size changes the size of the picture: 1 = Full Screen (Recommended) 0.125 = 1/8 Screen - Loading a photo takes about 3 seconds. - Click draw photo to redraw the photo after importing a code or after changing colour effect or draw size. - Click hide camera to hide the camera if it is in the way of the result. - Load photo asks for a code which can draw a picture.
Forum for codes: https://scratch.mit.edu/discuss/topic/225491/ - You need a computer camera for this to work. - Taking pictures offline may speed it up. - It takes around a few minutes for each photo. - Resolution: 1 = Best Quality, 0-5 Minutes. 4 = Worst Quality, 0-3 Minutes. •••••••••••••••••••••••••••••••••••Updates••••••••••••••••••••••••••••••••••• 16/11/2016: Codes now get compressed. 13/11/2016: Made pixels square instead of circle.