Please wait for the speech to finish before you go to the next step or it will glitch. This project shows how to make a DIY Deathly Hallows charm. I like to use them for necklaces and earrings, but if you can find any other cool uses let me know in the comments! Sometimes it may not be 100% clear what I am showing you. If something doesn't make sense, please tell me in the comments and I will try to explain it better. :) I have tried my hardest to make the pictures clear, but sometimes that is easier said than done. I have taken pictures of myself making one to make this project. Some of the pictures aren't very good. In case you can't see what the supplies/materials are I'l make a list of the things I use just here: ~about 20 - 30cm of thin wire. (the wire I use is just from a hardware store or someplace) ~A small piece of wood. ~3 nails. ~A glue stick. ~A little piece of paper with the Deathly Hallows symbol on it of your preferred size. (to get one I just search up 'deathly hallows sign' on the internet, and print one off in the size I want.) ~A texta or marker pen which has a lid the size of the circle on your template. ~A hammer. (I use a small one) ~A little pair of pliers. (the ones I use have the yellow handles) ~A little pair of wire cutters (the ones I use have the dark green handles)
I have tried my hardest to make the pictures clear, but sometimes that is easier said than done. Music is Harry Potter theme tune (Hedwig's theme)