-------------------------------- To begin operation, the catch car must be in the appropriate position! -------------------------------- E-Stop: E Console Enable: Click or P Maintenance Enable: M Restraints Unlock: O Restraints Lock: L Gates: Click Fault Reset: T Start Enable: Space Cycle Start: D Cycle Stop: S Mode 1/2: Click Entrance/ Exit Gates: Click ------------------------------------ The following keys can be used with maintenance enable "on" ------------------------------------ Up: Catch Car and Carriage Raise Down: Catch Car and Carriage Lower Left: Catch Car Only Raise Right: Catch Car Only Lower A: Manual Carriage Release ------------------------------------ Operation Notes ------------------------------------ To begin cycle, 1.All gates and restraints must be closed. 2.Maintenance Enable must be "Off." 3.Press Space Bar 4.Press and Hold "D" for 2-3 seconds ------------------------------------ To reset a fault: 1. Turn On "Maint. Enable" 2. Press "T" ------------------------------------ To reset an emergency stop: 1. Turn On "Maint. Enable" 2. Press "T" 3.Lower carriage/ lift manually by either "dropping" or slowly lowering the lift and carriage. ------------------------------------ Press R to reset the simulation
Build .58 ------------------- *Made simulation move a bit faster ------------------- *Added a new script for a more smooth drop featuring acceleration *Fixed Start Enable/ Cycle Start Bug *Drop Mode is now more reliable with internal changes *Relocated the Control Panel -------------------- See Instructions for how to operate!
