Elige entre símbolos o imágenes en la pantalla de carga. Cambia la posición de los componentes con "flecha derecha". Tendrás una serie de herramientas a tu disposición: -Fuente: Pila cuyo Voltaje puedes variar y final de circuito (riel de 0v) -Interruptores: Unidos a una fuente (o riel 0v) podrán activar o desactivar las bombillas y timbres a los que estén conectados. +Tipos: Actuante, Pulsador y Doble(no funciona todavía) Se cambia pulsando flecha arriba una vez seleccionado. -Bombillas: Se encenderán si están conectadas a las fuentes o a interruptores activados. -Timbre: Sonará si está conectado a las fuentes o a interruptores activados. -Resistencias: Puedes cambiar su valor y juntarlas en serie (Cable naranja) o en paralelo (Cable azul). -Cables: Cambia su tamaño pulsando flecha derecha. -Medidor: Mostrará el valor de la resistencia total tanto en serie como en paralelo -Giga: Borrará el circuito
Choose between simbols or images in the loading screen. Change the objects positions with "right arrow". You'll then be able to use a series of tools: -Source: Battery with variable voltage and a 0 volts circuit ending. -Switch: Joined to a source (or 0v ending), they'll be able to activate and deactivate the bulbs and buzzers they are attached to. +Types: Actuator, Push and Double(doesn't work) Change between them with "up arrow". -Bulbs: These will light up when they are attached to sources or closed switches. -Buzzer: It will make a sound when it's attached to sources or closed switches. -Resistance: You can change their values and join them directly (orange wire) or indirectly (blue wire). -Ohmmeter: You can measure the total resistance of the circuit. -Giga: Used to erase the circuit.