First off, this does take awhile, and you do need to use turbo mode for it to work with any decent speed Controls: Space opens the main interface for controls Layers is how many times it overlays/combines maps together(lower numbers makes it get to the final result faster but the final result isn't as pleasing) Number of cubes is how many squares it uses(essentially determines how many different gradient vectors are used) Generator is just to choose from a base generator with different effects Also, choosing reset just restarts the generation with the previously used settings Also also, the Octave variable tells you what layer its currently on Also pressing down arrow allows you to re-render it with it being slightly smoother
Recommended first configuration: Set Number of Layers to 20 Set Number of Cubes to 20 Set the Generator to 6 Set the Frequency Change Rate to 1 Set the Average/Smooth result to 0(setting this to 1 makes the FINAL result smoother but way more blurry) Set the Additive to 0.2 set the Multiplicative to 75(these names were just for reference for myself so I knew what they did) Turn on turbo mode and wait awhile Second Recommendation: Set the Layers to 20 Set the Cubes to 100 Set the Generator to 5 Set the Frequency change rate to 0.2 Set the smooth/average to 0 Wait for it to produce the black and white result, then press the up arrow
