1. Select a water source 2. Select a test kit to test the water with. ------ Examine the Water - perform a visual inspection of the water. pH - Calibrate the sensor using the pH 4 solution and then the pH 10 solution. Then test your water. Ammonia - Collect water. Add 10 drops of ammonia #1, 7 drops of ammonia #2, 7 drops of ammonia #3. Compare the color of your water to the ammonia test strip. Sulfate - Take a test strip and place it in the water. Compare your results to the test card. Nitrite - Calibrate the sensor with the Nitrite High solution to 100. Rinse and dry the sensor and calibrate the Low Solution to 1. Rinse and dry the sensor again. Then test the water. Fecal Coliform - Follow the instructions in the simulation.
This is a simulated water testing environment using real data for the various water sources.