INSTRUCTIONS FOR USE (VERY IMPORTANT, SCROLL ALL THE WAY DOWN): It is highly recommended you use this program with turbo mode on. Shift+click the green flag to turn it on. Black = Wall Green = Starting point Red = Goal Press 1 to change between drawing or erasing walls. Text will show up telling you which mode is now active when you press it. To move the starting point or goal, click on the one you wish to move (it should disappear), and then click on a white or black square to move it there. When your maze is ready, press the space bar. You might have to wait a moment. The program will highlight a possible path in blue. (The highlighted path may not be the most efficient path, but likely is.) To get a save code for your maze, press the c key and wait a moment. A box should appear. Double click the numbers inside the orange box to select, and then copy the code using ctrl+c.To hide the box, unselect the orange box by clicking outside of it (but still click somewhere inside the program) and press c again. Repeat this process to get a new code. To load a maze you have the code for, press the L key, paste your code into the response box, and press enter.
