☆All art is mine, and the people in them are either my OC's or from MHA, or Pfps that I've made, at: https://scratch.mit.edu/projects/466548694 You can actually buy some of these stickers on Ko-Fi.com, My name is SeabassStickers. ☆As for instructions, just click on the project to move it along, like a slideshow. ☆Music is Stickers, and So what, By Incredible Crew. ☆Intro Music: Electric by Bubblebee3 ☆---☆ ☆Do you want to make stickers like these? ☆Ok, its actually pretty simple. The hardest part is actually buying sticker paper. ☆I would recommend ☆OnlineLabels☆ sticker paper. ☆If you want them smooth, order 'glossy' and if you dont care, and just want them made cheaply, choose 'matte' also, make sure you order the right kind of paper for your printer, be it laser printer or an inkjet printer. ☆The wrong kind can MELT the inner glue in the paper and RUIN your printer, so make sure you read the description fully. ☆Depending on where you buy your sticker paper, it can cost anywhere from ten dollars to fifty, also depending on the amount of sheets and type, (Matte/Glossy) ☆10 to 15 Matte sheets would be a good start, and probably the cheapest option. ☆Now, once you have your paper, just stick 'em in your printer, wherever "Label paper" loads, (some printers have special slots) And send your digital file into your printer, and they come out as a sheet of glorious stickers! ☆You aren't done yet! You still have to cut them out. ☆I just use scissors, but as you can see, it leaves some rough edges. ☆There are actually little cutting tools for stickers, but I've never used one, so no recommendations there. ☆Hope this helped! :)