==( Display Controls )== [SPACEBAR] | Change mode (Light Mode/Dark Mode) [ Up Arrow ] | Show/Hide Lane Control Display ==( Left Turn Signal 1 )== [1] | Signal Off [Q] | Red Light [A] | Yellow Light [Z] | Green Light ==( Left Turn Signal 2 )== [2] | Signal Off [W] | Red Light [S] | Yellow Light [X] | Green Light ==( Through Signal 1 )== [3] | Signal Off [E] | Red Light [D] | Yellow Light [C] | Green Light ==( Through Signal 2 )== [4] | Signal Off [R] | Red Light [F] | Yellow Light [V] | Green Light ==( Right Turn Doghouse Signal )== [5] | Signal Off [T] | Red Light, No Arrow [Y] | Red Light, Yellow Arrow [U] | Red Light, Green Arrow [G] | Yellow Light, No Arrow [H] | Yellow Light, Yellow Arrow [J] | Yellow Light, Green Arrow [B] | Green Light, No Arrow [N] | Green Light, Yellow Arrow [M] | Green Light, Green Arrow
==( Introduction )== It's been a while since I had shared a traffic light project, but here is version 2.0 of Controllable Traffic Light Intersection! This new version includes a Light/Dark Mode feature and Lane Control Info! ==( Dark Mode )== In Dark Mode, the signals are darker, except for the backplate border and indications, the pole and signs are darker, and the lane control display is easily visible. You can switch to Dark Mode or Light Mode by pressing the spacebar. ==( Lane Control Display )== The Lane Control Display allows you to see which lane(s) the signal(s) controls. This allows you to view which lanes are controlled by the signals, even if there is no sign nearby the signal. To show or hide this display, press the Up Arrow key. ==( Turbo Mode )== This project runs best in Turbo Mode (Shift + Click Green Flag), as you won't experience delay with changing the mode.
