Use it like a real lift These were some AWESOME LIFTS But they are being ruined, just like the Schindler Miconic Lifts in Takashimaya shopping center in Singapore. (Those got ruined by KONE already) The right lift has been replaced by KONE with KSS570, and an MX18 EcoDisc in the Motor room. This sadly uses KONE KCE Logic instead of LCE. The left lift goes up one more floor, but there is no button. There is a key-switch at the bottom of the pannel. The Left lift was going to start modernisation in March from Schindler, but it has been cancelled because of funding problems. Press space to show an image of what the lifts will look like post-modernisation. Lifts 1/2-Express Mod Generic Lifts 3/4-Express Mod OTIS Lifts 5/6-Schindler MT Mod OTIS Lifts 7/8-This One-KONE TMS Novel Elements (Mod In progress, KONE/Schindler) Lift 9-MontgomeryKONE Hydraulic (Broken) Lifts 10/11-Will come to those later-Schindler MT and M/V Lifts 11/12-Will Come to those later-OTIS E311 mod by weird Japanese lifts mod again by Chinese Generic
Thanks to Hissen3000_Scratch for the original project R.I.P! 2x KONE M-series mod by KONE Novel. A Serious logic upgrade has been implemented to allow both lifts to run. Firstly, you don't enter the lift automatically, but you wait until the lift is at your floor, and when the doors open, click the lift. Secondly, The doors on the outside are the same opening as the other lift. (Center Opening). This mod allowed the 2 lifts to work. Thirdly, I added "Selectlift" variables to determine which lift came. This is ONLY required for lifts of 2 different makes. For lifts of the same make, a different variable is needed. Fourthly, door speeds adjust to the lift's door speed. Fifthly, The logic contains running instructions for both lifts, which runs the logic script for the chosen lift ONLY, by using an IF/ELSE statement. Sixthly, well, you can find out what else I changed.