Follow the really easy and simple instructions to create an image 1000 times slower than you can print with a thrift store printer 0. Buy a 3D printer (if you’re here you should have one already) 1. Add an image that’s transparent (or don’t and get a solid rectangle that takes 40 minutes to print) 2. Scan by pressing space 3. Export the list 4. Rename the txt file from .txt to .gcode 5. Load the gcode onto an sd card 6. Put the sd card in to your 3D printer 7. Disassemble your 3D printer’s extruder (if it gets in the way) 8. Tape a marker or pen on to the printer 9. Run the gcode you put on the printer
My printer is 150 mm by 150 mm if you printer is smaller or larger you might want to adjust some things Results: The “Test” text was the most readable (note the “e” was mostly sold except for the middle), the least readable text was “YOUR FAVOURITE ANIME IS”, “Dirt” was readable except it’s now bold. Also please feel free to remix this project and I will test it (if I have the time) also don’t expect feedback unless you really need it and this is my third (I think) scratcher account and it’s not my main account so I probably won’t respond (more info: I will probably put a link to my main account when this account reaches scratcher)