[Works on Mobile] You can hover over the buttons on mobile by dragging your finger over it, but do not press down on top of the button. Click the attunement structure to begin. It will show you every animatronic part type. Click the one you want to attune. Hovering over it shows you how many parts/meebs you already have of that type. After choosing a part to attune, you will need to choose the part to attune it to. Each part represents that part. Below, you can see which part you have selected with an arrow pointing to the part you are attuning it to. Hovering over the part will show you the element they represent. Once you have all the parts you need, click on the synthesizer. It will show you all the attuned part types. Choose three or four of them, then click confirm. Each one represents an element for the animatronic you going to synthesize. But watch out! The synthesizer is unstable, and it won't work 100% of the time. If successful, an egg will appear in the synthesizer and all the parts involved will get unattuned. If it's unsuccessful, you will not synthesize the annimatronic and only one of the parts involved will get unattuned. You cannot attune a part while the synthesizer is active. You cannot synthesize parts while the attunement structure is active. You cannot attune a part to it's own part. For attunement and synthesizing, the timer needs to count up to 100 for it to be done. All animatronic and parts take the same time.