------------------------------Features--------------------------------------- Both the program and descriptions are formatted for computer, not mobile. They are compatible, but will not be as pretty. On other notes, the following will describe all the buttons and features. Under the notes and Credits, there are a few warnings and suggestions to prevent personal harm to the ears and body, as well as a few notes. --------------------------------------------------------------------------------- - Toggle Program - Pressing this button Starts/Stops the system. The light on the right will be red for off, and green for on. The program runs for 3 minutes before turning off. There will be a 2-second delay between the moment you press the Toggle Program button and the start of the timer, unless a notification appears. If no preset is selected, a message will appear stating so, and this program will act as a 3-minute timer. You will be unable to start a new preset while the program is on. To cahnge presets, please wait until the program has ended or press the Toggle Program button to stop the program. --------------------------------------------------------------------------------- - Sound Check - Pressing this button when no other systems are in action will play the four sounds used in the programs(Start/Stop, High Beat, Low Beat, and Dual Beat). When a program is running, the sounds will not play, and an error message will occur. Pressing this when the program is not running will also turn the presets off. --------------------------------------------------------------------------------- - The numbered buttons act as "levels," 1 being the most simple, and 8 having the most variability. Pressing on them will activate them and switch the preset to that number. The selected preset will be blue until another preset is selected. If no preset is blue, no preset is active. If you are on a computer, each preset will become blue while you are hovering over it. Hovering over a preset does not activate it. On mobile, the button you last pressed will be blue despite what preset is active. --------------------------------------------------------------------------------- - Toggle Time - This button will show/hide the timer. It is not recommended to have the timer visible as it takes your concentration away from the experience. --------------------------------------------------------------------------------- Debug - This button shows the active variables. Each variable serves a purpose for the script the program follows. This button is available to allow the user to see what is happening behind the scenes. It is also available to catch and spot bugs and help the developer(me) fix them. The total list is here: On/Off - Lists if the program is on or off. Program # - Shows the current preset number. Sound Test - Shows if the Sound Test is on. Timer Show? - Displays whether the timer SHOULD be showing. Debug - Shows if the debug variables are showing. Timer - Shows the time left on the program. --------------------------------------------------------------------------------- - If an error occurs, a message will appear at the bottom of the window stating so. To remove it, click/press on it, and it will go away. Please refer to the section that you pressed last to find out what problem occurred. --------------------------------------------------------------------------------- If a bug appears, please do the following depending on the platform you are using: Scratch - Please comment what you found and I will work to fix and improve the code where I can. I will keep a log of what has been fixed and when, along with a comment of the problem and it's current status. Other Media - If there is a bug with the program, please go to and comment(under the page) the problem that occurred. If the problem is with the website(a button could not be accessed due to the screen not being big enough, buttons are unable to be interacted with, etc.), please contact the website administrator/owner with the issue, and ask for them to contact me with through comments or direct messaging to resolve the issue. ---------------------------------------------------------------------------------
-------------------------SOUND WARNING---------------------------- This project uses sporadic and unpredictable sounds. If you are sensitive to these, it is recommended you do not start the program. Use at your discretion. --------------------------------------------------------------------------------- It is recommended to keep your volume only as loud as it needs to be. Try using the "Sound Check" feature to see how you need to adjust your volume so the experience is as safe and comfortable as it can be. Please start using the lowest volume setting, and increase after each check to ensure safety of the ear. --------------------------------------------------------------------------------- Please note that 3 beats may play at random. The "High Beat" is present in all presets. The "Low Beat" is present in all presets after preset 2. The "Dual Beat" is present in presets 6, 7, and 8. On the 8th preset, all "Beats" are present and have an equal chance of playing, and only the "High Beat" will play on the 1st preset. Additionally, on the start and stop of the program, a separate sound will play to inform you of the start/stop of the program. --------------------------------------------------------------------------------- Updates are available at requests. Major changes will also be noted. --------------------------------------------------------------------------------- Please refer to my Scratch account when looking to accredit for this program.
