Please read instructions carefully : Use it like a real lift/push buttons on this very weird semi automatic lift thingy. WARNING : Loud noises, flashing lights and potential jumpscares ! CAUTION : Risk of cringe/disturbing stuff !
LF2021, ME5, halfai, Jon5432, MS54 and all… Full title : Hydraulic lift with a strange mod at a weird random little mall… Lifts of the building : - Main passenger lift : https://scratch.mit.edu/projects/975361148/ - Mixed-use goods/freight lift : https://scratch.mit.edu/projects/976367730/ - Weird glass lift : You are here. Brand : Robertson Lifts (According to building owner & Robertson was created in late 1995 and they installed Electra Vitoria lifts w/ Sprinte EV logic back then. Also, there are 2 another Robertson lifts here, one from 2006 and the another one is from 2012). Year : 2006. Modernized by Turner Lifts in 2020 (BTW, Turner Lifts was created in 2002, they also installed Electra Vitoria lifts with Sprinte EV controllers back then). Type : MR Single Ram Inground Telescopic Hydraulic. Doors : Selcom (Door mechanism, interlocks and landing rollers replaced/upgraded with Meiller in 2012). Motor : Bucher Hydraulics. Logic : PLC MicroSmart (Now Lester Controls Almega 2). Buttons : DMG B5 Inox (Now Dewhurst US 91 EN). Voice : ALS (Now Lester + random other voices). Starter type : Star-delta (Unchanged). Speed : Unknown but relatively fast. Position of motor room : Close to the lift pit, at floor 0. Capacity : 1200 Kg or 16 Persons. Floors served : 2 [0 - Lower Mall, 4 - Upper Mall] (Floor numbering is incorrect, it’s actually 1 - Lower Mall and 3 - Upper Mall). Positioning system : Shaft bars + IR beams. Location : Random small scale undisclosed mall (Former early 80s office building), Gloucester, UK. Other : This lift is one of the strangest things I’ve seen ! Since it’s been modernized it has both call buttons and PIR sensors but the call buttons don’t call the lift and the PIR sensors call it. There’s also a travel button (It already had a travel button when it was built) which is also totally useless since this lift wait for someone to trigger one of the 2 PIR’s, opens and close the doors if the PIR at the lowest floors is activated, then goes to top floor, opens and closes the doors, then goes back down to bottom floor, then waits for someone to press « door open » or PIR activation. What an odd thing ! Also when the door closes, it keeps saying « Please mind the doors », goes BEEEEEP like the Paris Metro, then it closes the doors while saying « Doors closing, please mind the doors, doors closing » and that’s what I call a very weird kind of nudge mode thingy ! Also, it has a very odd up chime & the IMEM Ascensores down chime ! What a freaking odd thing !!!! It also has some weird looking flashing door sensors, a new LCD HD floor display (Formerly generic DMG LED dot matrix display) and 2 odd LCD HD TVs ! And it’s also got many other oddities and a very loud & rather nice-sounding Bucher hydraulic motor ! And also, the shaft bar for slow down on the way up located at the top of the lift shaft doesn’t work, so the lift continues at full speed, then stops like a single speed lift (On the way down it runs like a normal 2 speed hydraulic lift), then it goes out of service and doesn’t work until someone calls a technician using the alarm button or a security guard notices that it went out of service and calls a technician. But if… …you want to find out why this lift is so odd, scroll down and… …CHECK OUT THE SHARING DATE BRO !!!!! Or keep on scrolling down… BTW happy Easter Day and April fools day and BTW, this project is my April Fools and Easter Day special !